This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features
Specifications
UPC: 4961310146023
Features
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specifications
- Cartridge & Stylus
- Frequency Response 20-20,000 Hz
- Channel Separation 18 (dB at 1 kHz)
- Vertical Tracking Angle 23°
- Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
- Stylus Construction Bonded round shank
- Recommended Load Impedance 47,000 ohms
- Coil Impedance 3.3 k ohms (1 kHz)
- DC Resistance 485 ohms
- Coil Inductance 550 mH (1 kHz)
- Output Voltage 4.0 mV (1 kHz, 5 cm/sec.)
- Output Channel Balance 2.5 dB (1 kHz)
- Stylus Shape 0.6 mil conical
- Cantilever Aluminum pipe
- Static Compliance 17 x 10 – 6 cm / dyne
- Dynamic Compliance 6.5 x 10 – 6 cm / dyne (100 Hz)
- Mounting Half-inch
- Cartridge Weight 6.1g
- Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
- Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers
- Model AT-VM95C
- Mounting Feature Half-inch mount
- Recommended Load Capacitance 100 to 200 pF
- Replacement Stylus AT-VMN95C
- Stylus Size 0.6 mil
- Type VM Stereo Dual Magnet
- Weight 6.1 g (0.22 oz)
- Wire Used for Coil T.P. Copper
UPC: 4961310146023